Adjusting Brew Strength on the Senseo
Ever wanted to adjust the brew strength of your single serve coffee brewer? This is not for the faint of heart. You are going to need tools, the ability to speak Dutch, and yes - a Senseo. You are also going to need to make sure and have that last cup of Senseo coffee from your beloved machine if anything does in fact go wrong. And, we are pretty sure this voids the warranty.
"...The website below is written in Dutch, but looking at the pictures is enough. Assuming you have a newer Senseo, just look at the pictures of the machine that's white or gray on the bottom. Within the red box in the pictures you'll see an indentation in the bottom of the machine. You'll need some needle-nose pliers to break off that little tab that's sticking up. This will reveal a little plastic washer. Ideally you need a hex driver, but the right-size screwdriver will do. Turn to the left for less water/stronger coffee, turn to the right for more water/weaker coffee."
At Adjusting Brew Strength on the Senseo
Read More in: Senseo
Share this Article with others:
Came straight to this page? Visit Single Serve Coffee for all the latest news.
Posted by Jay Brewer at September 7, 2005 8:52 AM